> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Larry D
> Snyder, CEN, RN
> Sent: Wednesday, March 31, 1999 10:23 AM
> To: Jon Ribbens; pmuser@minbar.taranaki.ac.nz
> Cc: portmaster-users@livingston.com
> Subject: (PM) Cisco 804 stac and multilink PPP connecting with PM3
>
>
> I have a Cisco 804 I'm trying to configure to access my PM3 running the
> latest ComOS - and from time to time the PM3 shows the 804 connected - but
> no data is being transferred. The connection needs to be dropped and
> re-established - and then things work "as they should".
>
> I have "compress stac" and "ppp multilink" in the 804 configuration for
> interface Dialer1 and BRI0
>
> I did have a similar problem with BACP and stac with the Pipeline
> 75 - could
> it be that the problem is with the Portmaster ComOS and not the
> hardware on
> the remote end (ie: 804 or Pipeline 75?)..
>
> Any words of advice?
>
> LS
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>