Re: (PM) lost ports 0 -23

MACN admin (admin@macn.bc.ca)
Thu, 1 Apr 1999 19:07:16 -0800 (PST)

> > why would on a remote reboot would we lose the ports 0 - 23?
> >
> > i was adjusting the pool size of ip address and when it came back up all
> > we get is busy signals.
> >
> > We now seem to have w0 port showing up but we don't use this.
>
> Line zero has been reconfigured for a T1 WAN and not PRI/CT1
>
> do a :
>
> show line0

here is the output from show

mojoe> show line0
---------------------- line0 - T1 1.536 Mbps ---------------

Status: UP Framing: ESF Encoding: B8ZS PCM: u-law

Receive Level: +2dB to -7.5dB

Alarms Violations
----------------------------- -----------------------------
Blue 0 Bipolar 0
Yellow 0 CRC Errors 0
Receive Carrier Loss 0 Multiframe Sync 0
Loss of Sync 0

line1 is the same and we don't use it

*-------------------------------------------------------------------*
| Mt. Arrowsmith Community Network |
| admin@macn.bc.ca http://www.macn.bc.ca |
| Providing low cost access to the Internet for the general public. |
*-------------------------------------------------------------------*

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>