RE: (PM) STAC Status

James Courtier-Dutton (dutton@livingston-ent.co.uk)
Fri, 2 Apr 1999 19:12:16 +0100

Hello
There is a command, it is a "sh reg xxxx" command. Except I cannot remember
it off the top of my head. Search the list archives and you will find it.
I think it was "sh reg 0x186" or "sh reg 0x183", if it shows 8, you have a
stac card. If it shows 0xffff you don't.
Cheers
James

> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Brian Horvitz
> Sent: Friday, April 02, 1999 06:39
> To: portmaster-users@livingston.com
> Subject: (PM) STAC Status
>
>
> Anybody know of a way to determine the status of a STAC card in a PM3?
> More specifically, I want to be able to tell if there is a card installed
> without cracking open the box...
>
> ---
> Brian Horvitz
> Shore.Net
> Network Engineering
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>