STAC Card present:
Command> sh reg 0x186
I/O register value at address 0x186 = 0x8
This might be what you are looking for. :-)
Cheers
James
> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Thomas Kinnen
> Sent: Friday, April 02, 1999 06:59
> To: portmaster-users@livingston.com
> Subject: Re: (PM) STAC Status
>
>
> Brian Horvitz wrote:
>
> > Anybody know of a way to determine the status of a STAC card in a PM3?
>
> There is a way but I can not remember it off the top of my head. Try
> searching the archives as it's on the list every now and then.
>
> --
> Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my employer's,
> unless they were given to me by my employer"
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>