On Fri, 2 Apr 1999, James Courtier-Dutton wrote:
> Hello
> Search archives for "sh reg" comes up with the following:-
> STAC Card NOT present:
> Command> sh reg 0x186
> I/O register value at address 0x186 = 0xffff
>
> STAC Card present:
> Command> sh reg 0x186
> I/O register value at address 0x186 = 0x8
>
> This might be what you are looking for. :-)
> Cheers
> James
>
>
> > -----Original Message-----
> > From: owner-portmaster-users@livingston.com
> > [mailto:owner-portmaster-users@livingston.com]On Behalf Of Thomas Kinnen
> > Sent: Friday, April 02, 1999 06:59
> > To: portmaster-users@livingston.com
> > Subject: Re: (PM) STAC Status
> >
> >
> > Brian Horvitz wrote:
> >
> > > Anybody know of a way to determine the status of a STAC card in a PM3?
> >
> > There is a way but I can not remember it off the top of my head. Try
> > searching the archives as it's on the list every now and then.
> >
> > --
> > Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
> > [RADIUS Test Engineer] - LUCENT Technologies RABU
> > "All of the opinions stated above are my own and not my employer's,
> > unless they were given to me by my employer"
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
> >
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
--- Brian Horvitz Shore.Net Network Engineering- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>