Just had a call back on a non-critical problem in less than 24 hours. The
Livingston rep was knowlegable, patient and we have a clarification and
solution in less than 1/2 an hour! Great work Livingston!
For the record here, the Livingston PM2 (I am just discussing PM2's here,
NOT PM3's) can only do load-balancing on the Async ports but can do either
load-balancing OR MP on the ISDN card. The way you force one or the other is ;
set <location name> multi on *** Use MP
set <location name> multi off *** Use load-balancing
This is important as I had interpreted this parameter as 'use more than one
connection yes/no' but this is not the case. The reason this is important is
that if you want to connect a PM2 with external TA to a PM2 ISDN card or PM3
PRI/CT1, you must use load-balancing, not MP because the PM2 with external
TA is not capable MP on serial ports.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>