> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Jim Tinlin
> Sent: Friday, April 09, 1999 10:43
> To: portmaster-users@livingston.com
> Subject: (PM) SNMP PM2
>
>
> I'm trying to do some SNMP monitoring on my old PM2's (good
> stuff) and I don't know if I'm missing something or need to update
> the ComOS.
>
> I can't get any of the user information, which I see in the .mib is in
> the serial interface tables. If I do an SNMP walk, I don't see any of
> this info.
>
> Presently I'm using ComOS 3.3.1 and never upgraded because I
> didn't think I needed to (if it's not broke, don't fix it).
>
> Anyway, is a ComOS upgrade necessary to read these points? Or
> is there a 'word definition' I can use to read these points? When I
> use the OID (used in the example on Livingston's Web Page), I get
> this:
>
> snmpwalk pm1 public livingstonSerialUser | more
>
> I get this:
>
> sub-identifier not found: livingstonSerialUser
> Invalid object identifier: livingstonSerialUser
>
> Any help would be appreciated.
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>