:Is it possible to connect an IRX-211 to a PM3 via the async ports, i.e.,
:the C0 on the PM3 to the S0 on the IRX? I tried all day on Saturday to make
:the connection without success. If I turn cd off both ports show
:"connecting" but never get established. When cd is on the port shows idle.
Yes it is possible. Are you using a null modem cable?
:Maybe I'm going about this the wrong way. I'm trying to establish a
:separate office network via the IRX by using the IP address of the PM3 as
:the gateway, and only using one IP number out of a class C. The IRX would
:have the "real" IP number, while the internal hosts would have the 10.0.0.0
:numbers.
Ugh... dont know enuff about setting up a 211. Ask Thomas. ;-)
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger, VP. ph:713-772-6690 Lucent Dealer
AMS, Inc. fx:713-774-3498 Medical Billing
8300 Bissonnet #400 jake@ams.com , ICQ# 4403734 Internet Services
Houston, Texas 77074 www.ams.com/~jake and Hardware
Adjunct Professor University of Houston, CBA jake@uh.edu
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
INVENTOR OF the _.,-*~' '~*-,._ SQUIGGLES (c) 1978
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>