Re: (PM) Re: PM3 modem card (fwd)

Thomas C Kinnen (tkinnen@livingston.com)
Tue, 13 Apr 1999 08:52:02 -0700

Jake Messinger wrote:
>
> The modem at M18 is the one missing. I have moved the suspect card to
> different positions in the chassis and the modem always goes down. I have
> rebooted the box a few times to try and bring it back, and also have issued
> the 'set m18 on' command with no success.

If that's a 10 port card and the DSP follows the card then I would say there
is a problem with it.

-- 
Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>