Re: (PM) avoiding -- Press Return for More --

Thomas C Kinnen (tkinnen@livingston.com)
Wed, 14 Apr 1999 07:34:10 -0700

Michel DUMAS wrote:
>
> Hello
>
> I'm using a portmaster 3 with Comp 0S 3.x.x
> Does someone know how I can avoid the break instruction that makes the
> ComOs stop to print after the 20 1rst lines with a
> -- Press Return for More --

If you use PMTools in it will not pause the out put. PMTools also has an
interactive mode where you can run PMCommand with no command and it will
give you a prompt.

-- 
Thomas C Kinnen - <tkinnen@ra.lucent.com> <tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>