Setup a filter and run ptrace. Even better is if you have a
seperate box
you can run snoop or etherpeek on and monitor the actual
eithernet packets.
For makeing the test valid you realy need to run the sniffer on
a box other
then the PM and RADIUS server
> My settings are given below,
>
> sh global :
>
> Default Host: 0.0.0.0
> Alternate Hosts:
> IP Gateway: 3.87.88.254
> Gateway Metric: 1
> Default Routing: Quiet (Off)
> OSPF Priority: 1
> OSPF Router ID: 3.87.88.225
> Name Service: NIS
> Name Server: iscmed
> Domain: ISC
> Telnet Access Port: 23
> Loghost: iscmed
> Maximum PMconsole: 10
> Assigned Address: 0.0.0.0
> RADIUS Server: olcapp-p3 1812
> Alternate Server: 0.0.0.0
> Accounting Server: olcapp-p3 1813
> Alt. Acct. Server: 0.0.0.0
> ChoiceNet Server: 0.0.0.0
> Alt. ChNet Server: 0.0.0.0
> PPP Authentication: PAP: off CHAP: on
Try turning PAP on.
I have tried both the ports with PAP on also.. But no help...
Actually it is verymuch possible to establish a PPP connection with a
PM3 on which
i have created a "netuser" locally...
Only RADIUS logins are failing....
Am i missing something from the glbal configuration....?
All rest of the portmasters (2) are worlking with Radius without any
problem......
I do not have any other utilities/resources other than debug conmmand on
PM3 ...
Pls help me on this....
Thank you
Regards
Shibu
> ISDN Switch Type: att-5ess
> End Point Disc: None
> Disabled Modules: IPX BGP
>
> "Pls note that Radius is working perfectly with PM2e
portmasters..."
>
> Also my debug status during the connection,
>
> set debu 0x51
> set cons
>
See:
http://www.livingston.com/tech/support/dring.html
Or run the PPP smart agent.
--
Thomas C Kinnen - <tkinnen@livingston.com>
<tkinnen@sobhrach.com>
[RADIUS Test Engineer] - LUCENT Technologies RABU
"All of the opinions stated above are my own and not my
employer's,
unless they were given to me by my employer"
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive:
<URL:http://www.livingston.com/Tech/archive/>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>