we have an office router running ComOs 3.7.2L then I renumber the ether
interface and add route network address 209.40.64.128/25 router ether
address
209.40.64.254 and met 1 (209.40.64.128/25 209.40.64.254 1) you can't reach
any host on the
new network but if you add route (209.40.64.128/25 209.40.64.132 1)
209.40.64.132 is a term
server and delete route (209.40.64.128/25 209.40.64.254 1) the network comes
up if you
change back to the old network it works as it should (old network
208.151.231.0).and the same thing
happens on an IRX114 running ComOs 3.7.2 on a differnt network.
DETAILS:Livingston all ready up loaded new comos
rt1-kf> sh rout
Destination Mask Gateway Source Flag Met Interface
----------------- ---- -------------------- ------- ---- --- ---------
0.0.0.0 0 208.151.229.1 local NS 1 frmW1
208.151.229.81 32 208.151.229.1 rip HD 3 frmW1
208.151.229.97 32 208.151.229.1 rip HD 3 frmW1
208.151.229.64 28 208.151.229.1 rip ND 2 frmW1
208.151.229.0 28 208.151.229.2 local NL 1 frmW1
209.40.64.128 25 209.40.64.132 local NS 1 ether0 (this
is a local term server adding this rout was the only way we could bring up
network ?)
209.40.72.0 24 209.40.64.130 local NS 1 ether0 (TNT
DSLANT for DSL)
209.40.74.0 24 208.151.229.1 rip ND 2 frmW1
209.40.69.0 24 208.151.229.1 rip ND 2 frmW1
208.234.221.0 24 208.151.229.1 rip ND 2 frmW1
209.40.66.0 24 208.151.229.1 rip ND 2 frmW1
206.100.190.0 24 208.151.229.1 rip ND 2 frmW1
208.205.192.0 24 208.151.229.1 rip ND 2 frmW1
207.48.101.0 24 208.151.229.1 rip ND 2 frmW1
198.68.27.0 24 208.151.229.1 rip ND 2 frmW1
172.31.0.0 16 208.151.229.1 rip ND 9 frmW1
rt1-kf> sh ether0
Ethernet Status: IP - Enabled IPX - Disabled
Interface Addr: 209.40.64.254
Netmask: 255.255.255.128
Broadcast Address: 209.40.64.255
IPX Network: 00000000
IPX Frame Type: ETHERNET_802.2
Ethernet Address: 00:**:05:**:24:**
Routing: OSPF, RIP(Broadcast, Listen (On))
Input Filter:
Output Filter:
rt1-kf> sh w1
----------------------- Current Status - Port W1 ---------------------------
Status: ESTABLISHED
Input: 1157604386 Abort Errors: 48/16
Output: 350043855 CRC Errors: 100
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 102
Modem Status: DCD+ CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext 1536K Ext Clock
Modem Control: on on
Local Address: 208.151.229.2 208.151.229.2
Netmask: 255.255.255.240 255.255.255.240
Interface: frmW1 (FRM,Routing) (FRM,Routing)
Mtu: 1500 0
Dial Group: 0
LMI Poll Int: 10 (seconds)
Old DLCI List: 17:208.151.229.1
rt1-kf> sh arp ether0
209.40.64.129 at 00:**:05:**:95:**
209.40.64.130 at 00:**:7b:**:63:**
209.40.64.243 at 00:**:18:**:65:**
209.40.64.244 at 00:**:05:**:c2:**
209.40.64.132 at 00:**:05:**:3d:**
rt1-kf> ver
Livingston PortMaster Office Router ComOS 3.7.2L
System uptime is 2 days 18 hours 41 minutes
I know its been a long week but this dosent add up to me.
thanks
Bob Shivers
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>