> Is there any plan to implement multichassis MPPP for dial in users on
> the 3.8x branch of the PM3 code?
Neil as Jake and Simon pointed out it's there ;)
Release notes are a wonderful thing to read.
and the acronymn is MCPPP in case you're wondering.
basically all you need is your PMx in the same subnet and they all must
share the same end point discriminator.
http://www.livingston.com/tech/docs/release/release35.html
Enabling MCPPP
Use the following commands on all PortMasters sharing a hunt group and
Ethernet, using the same 12 digit hexadecimal endpoint discriminator on
all of them. For convenience you may wish to use one PortMaster's ethernet
MAC level address as the endpoint discriminator for all the PortMasters on
that hunt group, but any 12-digit hexadecimal number will work.
set endpoint 00C005123456
save all
reboot
-- Aloha from Paradise,Sherwood Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>