Jeremy Malli
> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of James
> Courtier-Dutton
> Sent: Friday, April 23, 1999 4:01 PM
> To: Tim Tsai; Richard Morrell
> Cc: Edinilson J. Santos; portmaster-users@livingston.com
> Subject: RE: (PM) Turning off V90
>
>
> Hello
> Correct, there is a command to do it, and yes it is only given out in very
> exceptional circumstances.
> Cheers
> James
>
>
> > -----Original Message-----
> > From: owner-portmaster-users@livingston.com
> > [mailto:owner-portmaster-users@livingston.com]On Behalf Of Tim Tsai
> > Sent: Friday, April 23, 1999 10:35
> > To: Richard Morrell
> > Cc: Edinilson J. Santos; portmaster-users@livingston.com
> > Subject: Re: (PM) Turning off V90
> >
> >
> > On Fri, Apr 23, 1999 at 05:58:14PM +0100, Richard Morrell wrote:
> > > You can't disable modem protocols such as V.90 or K56Flex on
> > the pm3. If
> > > you want to stop negotiating V.90/Flex then you'll need to
> revert to an
> > > earlier version of ComOS that doesn't support those protocols.
> >
> > A couple of weeks ago there was a thread on this list about unofficial
> > commands that *can* make the modems V.34 only. For whatever reason
> > Lucent is not making those commands available.
> >
> > Tim
> > -
> > To unsubscribe, email 'majordomo@livingston.com' with
> > 'unsubscribe portmaster-users' in the body of the message.
> > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
> >
> >
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>