(PM) location setup & dialout killing ether0 (PM3)

James Hamilton (jamesh@swcp.com)
Sun, 25 Apr 1999 12:54:12 -0600 (MDT)

Hello, I've got a PM3 that I've set up for dialout. Every time I call my
Netgear ISDN router ether0 quits talking so I have to do an
ifconfig down then ifconfig up to reset it. It seems to only affect
ether0, if I have 2 logins to the PM3 they can still talk locally to
eachother. My location looks like:

Location: jamesh Type: Manual
Destination: 198.59.115.158 Netmask: 255.255.255.0
Local IP: 198.59.115.110
Protocol: PPP Options: Quiet, VJ-Comp
Group: 0 Max Ports: 2
Idle Timeout: 0 minutes High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000
Username: someuser Password: xxxxxxx

I'm a bit confused as to why this would occur. This PM3 is running ComOS
3.8 if that makes any difference. Any advice or comments would be
appreciated!

Thanks

James Hamilton

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>