> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of James
> Hamilton
> Sent: Sunday, April 25, 1999 07:54
> To: portmaster-users@livingston.com
> Subject: (PM) location setup & dialout killing ether0 (PM3)
>
>
> Hello, I've got a PM3 that I've set up for dialout. Every time I call my
> Netgear ISDN router ether0 quits talking so I have to do an
> ifconfig down then ifconfig up to reset it. It seems to only affect
> ether0, if I have 2 logins to the PM3 they can still talk locally to
> eachother. My location looks like:
>
> Location: jamesh Type: Manual
> Destination: 198.59.115.158 Netmask: 255.255.255.0
> Local IP: 198.59.115.110
> Protocol: PPP Options: Quiet, VJ-Comp
> Group: 0 Max Ports: 2
> Idle Timeout: 0 minutes High Mark: 0 bytes
> Mtu: 1500 Async Map: 00000000
> Username: someuser Password: xxxxxxx
>
> I'm a bit confused as to why this would occur. This PM3 is running ComOS
> 3.8 if that makes any difference. Any advice or comments would be
> appreciated!
>
> Thanks
>
> James Hamilton
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>