Re: (PM) Location table
jp@sugar.midcoast.com
Wed, 28 Apr 1999 17:45:34 -0400 (EDT)
> Can somebody let me know the Sequence of a location table when it
> execute for dialing out.. ?
>
> My location table given below,
>
> olc-pm5> sh loc shr
> Location: shr Type: Manual
> Destination: 10.1.2.1 Netmask: 255.255.255.255
> Protocol: PPP Options: Quiet, Analog
> Group: 0 Max Ports: 1
> Idle Timeout: 2 minutes High Mark: 0 bytes
> Mtu: 1500 Async Map: 00000000
> Username: xxxx Password:yyyy
> Telephone: 32726
>
> where xxxx and yyyy are login and password of the remote machine
>
> When i executed "dial shr -x" iam getting the following results,
> sendthem (VRA32726)
> expect (=DCD=)
> =DCD=got it
> S0: Chat Succeeded - Starting PPP
> (S0) PPP recv: BAD CRC - mdp M0
> (S0) PPP recv: BAD CRC - mdp M0
> .
> .
> S0: Connection Failed
The BAD CRC thing is probably the login prompt of the remote portmaster
being interpreted as a PPP in the case of PAP. This shouldn't prevent the
connection from working though, just make it look not so pretty.
I'd "set deb 0x51" and use the decoder on the livingston website which
should give you more details of why it won't connect.
--
/*
Jason Philbrook | Midcoast Internet Solutions
jp@midcoast.com | Internet Access, LAN, WAN, and Linux
www.midcoast.com/jp/ | Service and Consulting for Midcoast Maine
*/
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>