> In the Zyxel:
> - An invalid class for its network. (ie 192.168.201.X)
> - masquerading using an ip in destination class (ie 192.168.200.201)
>
> This is working fine.
>
> My Pm2 has the IP 192.168.200.200 with mask 255.255.255.0
>
> I can establish connection between PM2 and all the zyxel's and I can ping
> the portmaster from any computer behind the zyxel but I can't contact any
> other computer in the 192.168.200.X net.
Sounds like a routing issue. What does the routing tables on both ends of
teh connection look like and what does the PM user entry look like?
You can look under locations in the manual to see some examples of this type
of setup.
-- Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com> [RADIUS Test Engineer] - LUCENT Technologies RABU "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer"
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message. Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>