> -----Original Message-----
> From: owner-portmaster-users@livingston.com
> [mailto:owner-portmaster-users@livingston.com]On Behalf Of Thomas C
> Kinnen
> Sent: Friday, April 30, 1999 07:25
> To: John Lange
> Cc: portmaster-users@livingston.com; jake@ams.com
> Subject: Re: (PM) OT: Odd uses for old PM2's
>
>
> John Lange wrote:
>
> > Could I???
> > Use a null modem cable between the serial port on the Unix PC
> and S1 on the
> > PM.
> > S1 would have a static ip address
> > E0 would have a static ip address
> >
> > Then what do I do? does the nix box need to log into the PM?
> or would I
> > be able to telnet to the S1 address and access the nix box?
>
> You should be able to setup the PM for a hardwired network connection and
> use PPP or slip to get the Unix box on line if it has a PPP or
> SLIP driver.
>
> I've heard of it being done but have not tested it myself.
>
> --
> Thomas C Kinnen - <tkinnen@livingston.com> <tkinnen@sobhrach.com>
> [RADIUS Test Engineer] - LUCENT Technologies RABU
> "All of the opinions stated above are my own and not my employer's,
> unless they were given to me by my employer"
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
> Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>
>
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>