RE: (PMOD) 3.8.2c2 results after about 2000 calls...

Jeffrey T. Garell (jeff@esr.com)
Fri, 7 May 1999 07:05:09 -0400

Thanks - That's good to know, I was starting to get a bit worried :) What
script do you use to pull those stats out of Radius (is it in the pub domain
or should I just go mod one of my existing scripts?)

thanks again!

jeff

-----Original Message-----
From: Mike Tancsa [mailto:mike@sentex.net]
Sent: Friday, May 07, 1999 7:14 AM
To: Jeffrey T. Garell; portmaster-modems@livingston.com
Subject: RE: (PMOD) 3.8.2c2 results after about 2000 calls...

At 06:50 AM 5/7/99 , Jeffrey T. Garell wrote:
>I use the pm3-discon.pl script from Chris Adams (pulls from syslog) - and
we
>don't have any slip users....

The syslog values will include calls that never made it... e.g. if you dial
the number with a handset and just hang up, it will register as a Lost
Carrier. The stats I reported were based on RADIUS, so only include calls
that got past the authentication phase. My syslog results are about the
same as yours.

---Mike
**********************************************************************
Mike Tancsa, Network Admin * mike@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario * 01.519.651.3400
Canada *

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.