RE: (PMOD) 3.8.2c2 results after about 2000 calls...

Mike Tancsa (mike@sentex.net)
Fri, 07 May 1999 07:33:59 -0400

At 07:05 AM 5/7/99 , Jeffrey T. Garell wrote:
>Thanks - That's good to know, I was starting to get a bit worried :) What
>script do you use to pull those stats out of Radius (is it in the pub domain
>or should I just go mod one of my existing scripts?)

Just a one line change from
if (/terminated - (.+)$/) {
to
if (/LE-Terminate-Detail =(.+)$/) {

and is run in the same ...

e.g.
cat detail | /usr/local/bin/pm3-discon2.pl

BTW, did you see any speed increases ?

Before..
v34 53.82% 2213/4112
v90 35.72% 1469/4112
v90medium 22.64% 931/4112
v90hi 7.42% 305/4112
14400 6.35% 261/4112
v90low 4.38% 180/4112
21600 4.11% 169/4112

after...

v34 55.80% 2822/5057
v90 33.99% 1719/5057
v90medium 18.90% 956/5057
v90hi 8.27% 418/5057
14400 6.07% 307/5057
v90low 5.30% 268/5057
21600 4.13% 209/5057

---Mike
**********************************************************************
Mike Tancsa, Network Admin * mike@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario * 01.519.651.3400
Canada *
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.