> In one case, the user couldn't connect with any init string or commas (we
> tried +MS=V34 and +MS=V90,,,,,41333). But he can connect without anything
> at all! (But not reliably, disconnections are still going to be a
problem).
>
> Here are the results of the More Info from the Modem Control Panel.
>
> Acer Aspire Acerview 54E.
>
> ATI1: 255
> ATI2: OK
> ATI3: 2.1.2.110
> ATI4: ROCKWELL HCF 56K DATACOMFAXPCIMODEM
> ATI5: 181
> ATI6: DP REV BA
> ATI6: SPX DOWNLOAD 44
> ATI6: CTL DOWNLOAD 44
> ATI7: 255
> AT + FCLA...0,1
>
> I know that there is an update available for this, but since the computer
> is so vague about which modem it is, I'm hesitant to DL an upgrade from
> Acer. Can anyone suggest which file to use (please provide an exact URL).
>
There's no update available from Acer ftp site:
ftp://ftp.acer.com/aac_support/desktop/drivers/modem/56KV90.EXE
The 00-INDEX.TXT file says it is 2.1.1.110, but the version information in
the files is 2.1.2.110.
To obtain a list of HCF drivers, visit:
http://808hi.com/56k/rockhcf.htm
Be sure to read the "NOTE" under the table of Manufactures. This note
explains how to modify the HCF_MODEM section so that the modems PNP ID is
recognized by the driver..
I plan on using the Zoltrix HCF driver (2.1.2.156.012). The following needs
to be added to the HCF_MODEM section (cxt1035m.inf):
%PCIFriendlyName% = ModemPORT, PCI\VEN_127A&DEV_1003&SUBSYS_10031436&REV_01
Scot
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.