We're running the latest non-beta release of the PM3 code. The modem is
a Xircom CreditCard Modem 56T running on a Toshiba laptop with Windows
95 and a firmware of 2.08 which seems to be the latest off the Xircom
site. I've ruled out that it is the phone lines, since another computer
he owns with a different modem can connect as high as 46k...
Things I've tried:
a) 1 to 3 commas. 2 commas seem to worked once or twice, but I could
never reproduce it with any charm.
b) Forcing "required to connect" for error checking. Tried this in
conjunction with commas. No go.
c) Forcing v.90 connections using ATS109=2, which is what was
recommended in the firmware upgrade README docs. This was tried with the
commas as well. No go.
His AT commands come back as:
ATI1 BAC7
ATI 2, 5, 6, and 7 OK
ATI3 Xircom CreditCard Modem CM-56T (release v2.08)
ATI 4 17
Thoughts or experiences are welcome...
Kevin Hemenway
---------------------------------------------------------------------
Total Net NH, LLC EMAIL: <info@totalnetnh.net>
15 Pleasant St., Suite 11 WEBSITE: <http://www.totalnetnh.net/>
Concord, NH 03301 HELP: <http://www.totalnetnh.net/tech/>
(603) 225-8422 SEARCH: <http://www.altavista.com/>
---------------------------------------------------------------------
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.