It prefers K56Flex over V.90 and then does a horrible job with K56Flex.
The documented way to get to V.90 is +MS=V90, but the damn thing ignores it.
The comma trick should work to get the modem to miss the V.8bis tone and therefore
not even try K56flex, but the .110 release of V.90 is not very good either.
Have the user upgrade. The .156 release on Zoltrix is pretty good, but somewhat hard
to find, check the following URL:
http://www.zoltrix.com/FMHCF56i-specs.htm
"Scot W. Hetzel" wrote:
> From: Jonathan Baldwin <jbaldwin@accessky.net>
> >Help!! A user has to try 4-5 times to connect, but then gets a good
> connection. Here is the info from his modem responses:
> >
> >Rockwell HCF 56K Data Fax Speakerphone
> >ATi1 255
> >ATi2 OK
> >Ati3 2.1.2.110
>
> The problem is that he has an old software driver installed (see ATI3), he
> needs to install at least v2.1.2.135 or the lastest version available for
> his modem (v2.1.2.156).
>
> Also, you might have him try adding "+MS=,,,,,41333" to his modems "Extra
> Settings". See for more information:
> http://www.livingston.com/tech/bulletin/comos-modem.html
>
> > This problem began at the time we upgraded to 3.8.2c2. I may lose this
> guy if we don't fix this. I told him to try the 3 >commas after the phone
> number.
>
> This problem is mentioned in the Release Notes, and that they are still
> working on the problem.
>
> Scot
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-modems' in the body of the message.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.