> Okay,
>
> Com OS 3.8.2 with PRI. I've checked the PRI line stats on each PM3,
> everything is appears to be perfect, no accumilated errors on every line.
> Switch type is att-5ess custom.
okay, have the user upgrade their modem code ... From my experiences .110
.134 are crap with PM3s. .156 is pretty decent (www.zoltrix.com)
> Please take to the appropriate list...
>
>
> On Wed, 7 Jul 1999, Jose de Leon wrote:
>
> > Every single HSP modem that has come my way will not connect at ANY SPEED!
>
> EVERYONE? hmm, that'd be extremely strange, there must be some factor
> that is similar to cause such a situation...
>
> > They only connect to our analog modem bank. What is it with these modems?
> > Something is there an init string for these modems to connect to the PM3s?
>
> Hmm, well your analog modem bank can NOT do 56K technology connections.
> So this points to a modem code problem. whether it's on the LRABU side or
> your clients is hard to say since you DIDN'T give enough information!!
>
> what ComOS are you running? What type of lines are feeding your PM3s?
> Have you contacted support@livingston.com yet?
>
> Otherwise it's a shot in the dark to answer your question!
>
>
> --
> Aloha from Paradise,
>
> Sherwood
> Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-modems' in the body of the message.
>
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-modems' in the body of the message.
>
-- Aloha from Paradise,Sherwood Got Clue? If so: ISPF! The Forum for ISPs by ISPs, <http://www.ispf.com>
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-modems' in the body of the message.