We went out this past week and bought a whole slew of modems for internal
testing purposes. One of which was an HSP Micromodem (packaged in a HiVal
box). Since we have been having so many problems with these and other
modems connecting we thought we would save some trouble and set up a
testing box here in house with these modems. One thing that I found with
the HSP is the system reqs are EXTREMELY high! The HiVal box says a P200+
for minimum reqs! I got it to work ok on a machine using an AMD PR166 with
64 megs of RAM but I would say that it the BARE minimum. If your customer
has a lesser system or too little memory I would say that could be the
case.
Gabriel
///////////////////////////////////////////////////////////////////////////////
-------------------------------------------------------------------------------
Gabriel Mark Mains SouthWind Internet Access, Inc.
Department Manager 120 S. Market
SouthWind Technical Support 316-263-7963
"REDUNDANCY HEREIN IS FOR PURPOSES OF EMPHASIS."
--from "Christs Eternal Holy Passion"
-------------------------------------------------------------------------------
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
On Tue, 13 Jul 1999, Tim Patton wrote:
> I thought that this would be a zoltrix, but I checked, and I didn't see
> that revision of driver listed at all on Zoltrix's website....they are
> only getting 31200 connecting to our PM3 3.8.2c2....any idea
> where I can find the newest drivers, or even who makes the bloody
> thing?
>
> Here's the ati commands
>
> ati0
> 56000
> OK
> ati1
> A97/C02
> OK
> ati2
> OK
> ati3
> PCtel 7.63-9CMS
> OK
> ati4
> PCtel Data/Fax/Voice/Speakerphone/V.80
> OK
> ati5
>
> OK
> ati6
>
> OK
> ati7
>
> OK
> ati8
>
> OK
> ati9
>
> OK
> ati10
> A97/C02
> ERROR
> ati11
> A97/C02
> ERROR
> ati12
> A97/C02
> ERROR
> ati13
> A97/C02
> ERROR
>
> Tim
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-modems' in the body of the message.
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.