Hi have a SupraExpress Winmodem PCI and is one of the worst modem i have tried,
if i'm able to connect after 5 attempt i'm lucky, but when it connect all work
fine.
>
> > &N## Sets a maximum speed, replace ## with 30 for 45333, 29
> > for 44000... etc.
>
>My landlord had a problem with his AOpen 56K internal modem frequently
>disconnecting
>him. Even s10=40 wouldn't help. I limited the top speed of his modem with an
>AT+MS=
>command (Parameters can be found with a AT+MS=? command) to 46,000 bps and it
>made his modem rock solid.
The AOpen FM56KP is a winmodem and one of the best i have tried after i have
upgrade whit the beta driver from the aopen website....
>
> > Check out those driver dates and think.. all pre-v.90 ratification date,
> > except for the 2974.
>
>Actually, I demanded an explanation from Keating Technologies, which is the
>distributor
>for 3Com Products here in Canada.
And they never return call.....
>
>Apparently, 3Com already had a lot of the V.90 code in place when they wrote
>the code
>for the majority of their modems, a year prior to the V.90 ratification. When
>3Com helped come
>out with the V.90 ratification, many of their modems met the spec already.
>3Com
>then saw no
>reason to change the code on any of their modems. Don't forget that 3Com had a
>huge hand in
>defining what the V.90 standard was going to be. I am under the understanding
>that they did
>have to change some V.90 code on some Courier modems but that's pretty much
it.
>
>--------------------------------------------------------------------------
>Bud Bennett CADVision Development Corporation
>bennetb@cadvision.com Suite 1810, 300 5th Avenue S.W.
>Internal Systems, Calgary, AB, Canada T2P 3C4
>Modem Network Administrator Phone: (403) 777-1300
>http://www.cadvision.com Fax: (403) 777-1319
>---------------------------------------------------------------------------
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-modems' in the body of the message.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.