RE: (PMOD) Zoom Internal w/ Rockwell Chipset

Peter Court (pc@hotkey.net.au)
Tue, 14 Dec 1999 07:45:23 +1100

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Stephen Johnson: "(PMOD) Lucent G.Lite/v.90 modem connecting to PM3"
Previous message: Christopher D Christiansen: "Re: (PMOD) Zoom Internal w/ Rockwell Chipset"
In reply to: Stephen Johnson: "(PMOD) Lucent G.Lite/v.90 modem connecting to PM3"

I suspect that will be a L8570A chipset. Anything prior to 47.29
is crappy DSP code. 47.20 is very early V.90 firmware.

You will need to get the upgrade (if available) from Zoom.

rgds .. Peter

-----Original Message-----
From: owner-portmaster-modems@livingston.com
[mailto:owner-portmaster-modems@livingston.com]On Behalf Of Ben Conner
Sent: Tuesday, 14 December 1999 3:49
To: portmaster-modems@livingston.com
Subject: (PMOD) Zoom Internal w/ Rockwell Chipset

Hi,

I have a user who can't connect under Windows 98. He gets a msg 'Unable to
establish dialup connection'. He has a Zoom modem with the Rockwell
chipset (RCV56DPS L857A Rev 47.20/47.20).

We're running a PM3 vsn 3.9b22 w/ PRI lines. Anyone have a suggestion? I
tried Zoom's site but couldn't find any V.90 firmware updates (other than
from V.56).

Thanks in advance!

--Ben

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.

Next message: Stephen Johnson: "(PMOD) Lucent G.Lite/v.90 modem connecting to PM3"
Previous message: Christopher D Christiansen: "Re: (PMOD) Zoom Internal w/ Rockwell Chipset"
In reply to: Stephen Johnson: "(PMOD) Lucent G.Lite/v.90 modem connecting to PM3"