> > Is it possible to disable v42/v42bis on PM3's modems (which are "LU1674
> > Chipset" according to "show m0" command).
>
> The answer is no. You cannot disable any of the protocols on the PM3/4.
It is pity... Result of 'show modem' says, that many of disconnections are
'LAPM DISCONNECT'. I think, that disabling LAPM error correction and using
MNP instead of LAPM will help...
> These boxes respond to the clients request, so best is to use an init
> string on the client modem to disable such.
I'm an ISP and most of customers know nothing about protocols, modem
commands and so on. I can't suggest to disable all except MNP - they don't
know, what is it :(
-- Vladimir Litovka <doka@kiev.sovam.com> . Phone/Fax: +380 44 2351511 . ICQ/none, talk/none ;)- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-modems' in the body of the message.