(PMOD) Century Hayes 2 Modem Rack 16

Luis en ICOE (lwong@icoe.k12.ca.us)
Sun, 19 Dec 1999 18:43:12 -0800

This is a multi-part message in MIME format.

------=_NextPart_000_008E_01BF4A50.E7013B80
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi everyone!

For that past few days I have been trying to configure a Hayes Century 2 =
Rack with 16 modems using a PM2e. I can set the configuration OK to the =
modems. This is the string that I'm using:

AT&F&C1&D2&K3&Q5M0S0=3D1S10=3D60&W
Port Speed: 115200
Flow Control: RTS/CTS
Modems on Dumb Mode off

When I try to dial in, the modem answers and I get authenticated. After =
exactly a minute I get disconnected, every single time. During my =
connection time, everything seems to work OK. I still have not setup =
RADIUS and I'm using the User table on the PM and assiging a specific IP =
address for test purposes. Any suggestions?

------=_NextPart_000_008E_01BF4A50.E7013B80
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">

Hi everyone!
 
For that past few days I have been = trying to=20 configure a Hayes Century 2 Rack with 16 modems using a PM2e. I can set = the=20 configuration OK to the modems. This is the string that I'm = using:
 
AT&F&C1&D2&K3&Q5M0S0=3D1S10=3D60&W
Port Speed:=20 115200
Flow Control: RTS/CTS
Modems on Dumb Mode off
 
When I try to dial in, the modem answers and I get=20 authenticated. After exactly a minute I get=20 disconnected, every single time. During my connection time, = everything seems to work OK. I still have not setup RADIUS and I'm using = the=20 User table on the PM and assiging a specific IP address for test = purposes. Any=20 suggestions?
------=_NextPart_000_008E_01BF4A50.E7013B80-- - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-modems' in the body of the message.