configuration problem

FFT (ry90@www.punkt.de)
Thu, 2 May 1996 21:09:48 +0200 (MET DST)

Hi,
I have a (I think) simple configuration problem, but I am stuck
My system:
Portmaster 2e, Total COntrol Modem Rack, SUN with solaris.
Radius is on the SUN up and running. Modems connect, Portmaster
asnwers, ... Problems arise ;-)
What I want: User should connect to the portmaster, put in their
UID and passwd and then the portmaster asks radius if the user is
valid, and either connects or not.
At the moment no user can connect, regardless if valid of not.
I started radiusd with -x, and here is a small excerpt from
the output:
.-.-..-.-. cut here
radrecv: Request from host c24de801 code=1, id=59, length=56
User-Name = "ry90"
Password = "fancy passwort"
Client-Id = 194.77.232.1
Client-Port-Id = 4
Sending Ack of id 59 to c24de801 (194.77.232.1)
User-Service-Type = Login-User
Login-Service = Rlogin
.-.-.-.-.-.. cut here
ry90 is a valid user at the SUN system, and is a Login-User
set up at the users database of radius. But Login-Service
is PortMaster. Why is Radius saying: Rlogin???
.-.-.-
The other problem: The user is not accepted. It says:
login denied (or smoething similar). The ports are configured
as network dialin. Before they where configured as
Login/Network, and there I got the SUN prompt, and could
connect, although I had to type in the password twice... Why?
.-.-.-
I also want to configure PPP users, (or SLIP), that donno
have an account on the SUN. But it seems, the system does
not care about what I write into users database. Even with the
old port setting of Login/network nothing happened.
.-.-.-.
All help is apprechiated. I digged thru the manuals, but I could
not find anything.
The best thing I would which to have: A sample comfiguration
for PM2e and 10 Modems connected to any system, and how to set
the stuff up for login users, SLIP and PPP users.
.-.-.-
I personally have the feeling that some things with the PM2e
config is wrong, but I do not see what.

Thanks very much for listening.
Juergen