Re: Subnet routing through a PPP connection to a PM2e

Graeme Slogrove (graeme@fast.co.za)
Wed, 07 Aug 1996 22:59:21 +0200

At 11:23 AM 07/08/96 +0000, you wrote:

>ethernet with an IP in his subnet. How do I set up the Pm2e to route
>packets for this separate subnet through a PPP connection?

3 important entries in the radius file - his gateway address, a subnet
netmask, and the routing information.

Framed-Address = 196.28.25.129,
Framed-Netmask = 255.255.255.248
Framed-Routing = Broadcast-Listen,
Framed-Filter-Id = "",
Framed-Route = "196.28.25.130 196.28.25.129 1",
Framed-Route = "196.28.25.131 196.28.25.129 1"
Framed-Route = "196.28.25.132 196.28.25.129 1"
Framed-Route = "196.28.25.133 196.28.25.129 1"
Framed-Route = "196.28.25.134 196.28.25.129 1"

Graeme

---
FastLight Data Distribution cc - Your Internet 'Solution' Provider
Tel +27-(0)11-706-0212                      Fax +27-(0)11-706-0812
                                           Info :  info@fast.co.za
http://www.fast.co.za                      Sales: sales@fast.co.za