Regards
Danny Calamaro mailto:danny@gibnet.gi
Suite 16, Portland House, Gibraltar http://www.gibraltar.gi
Tel:(+350) 47200 Fax:(+350) 47272 http://www.gibnet.gi
I have had 8 out of 15 USR 33.6's go out since we bought them. Mostly =
they
won't accept incoming calls (they connect and then hang up), or the =
outgoing
calls connect at full speed, but then transmit slowly and sporadically.
What a pain.
At 08:22 PM 10/4/96 +1000, you wrote:
>
>I dont iknow about you guys, but there seems to be a lot of 33.6K =
modems=20
>with USR chips out there doing very wierd things. A number of my users=20
>have bought them and they are failing in all sorts of ways. Some dont=20
>respond at all, some wont create a socket but will run terminal mode,=20
>some will create a socket then after downloading a few bytes from a web =
>site will lock up.
>
>Very strange...
>
>
>Russell from Australiagate.
>
>
>On Thu, 3 Oct 1996, Robert Hanson wrote:
>
>>=20
>> do you control your pri and sec dns? this almost seems like a dns =
prob..
>> or your pm setup prob... we shall see...
>>=20
>> do you have a default host in the pm? i.e.
>>=20
>> show global
>>=20
>> is that the solaris box?
>>=20
>> then look at a port in the pm that is giving you this problem
>>=20
>> set sXX extended on
>> save SXX
>> show sXX
>>=20
>> does the host say "default"?
>>=20
>> if so... then...
>>=20
>> show table host
>>=20
>> if anything is there... id remove it if you control primary and =
secondary
>> dns...
>>=20
>> then... consider...
>>=20
>> set sXX host solaris-box-ip-address
>>=20
>> yet you need to do this for all ports if it fixes it...
>>=20
>> this has always fixed that problem for me...
>>=20
>> but i do pri and sec dns for me as well as pri and sec radius...
>>=20
>> sound right people :-?
>>=20
>>=20
>> --->
>> Robert H. Hanson Cutting Edge Communications, Inc. - =
blah,blah
>> Otis Orchards, Wa. Regional Commercial Internet Service =
Provider
>> (509) 927-9541 email: roberth@cet.com - =
http://www.cet.com/
>>=20
>>=20
>>=20
>> On Fri, 4 Oct 1996, Gene James wrote:
>>=20
>> >=20
>> > > From: Igor Brezac <igor@ipass.net>
>> > > Date: Thu, 3 Oct 1996 18:30:53 -0400 (EDT)
>> > > Subject: Radius unable to authenticate
>> > >=20
>> > > Hi,
>> > >=20
>> > > My users are starting to get "Host is currently unavailable" when =
they
>> > > login. We use radius on Solaris and we have four PM2E, all users =
are
>> > > authenticated through their UNIX passpord file. Is there any way =
to
>> > > reduce the occurance of this error? We also have fair amount =
UNIX
>> > > accounts. Would Network Service like NIS(+) help?=20
>> >=20
>> > We are getting this like crazy lately. I've determined that is it =
occuring
>> > when USR modems call our newest SupraFAX 336 modems (ver 1.440-12 =
or
>> > better). It is absolutely repeatable. We run radius on a Linus box.
>> >=20
>> > I have not determined WHY this is happening, all the modems I have =
to test
>> > with do not exhibit this behavior!=20
>> >=20
>> > Gene James
>> > Westmoreland Online, Inc.
>> >=20
>>=20
>
>
byoung@oru.edu =20
Brian Young =20
Internet Systems Administrator
=20