RADIUS 2.0, Prefixing, and BSDi (fwd)
Dustin Machi (dmachi@tusculum.edu)
Wed, 04 Dec 1996 08:54:32 -0500
>X-POP3-Rcpt: dmachi@annuminas
>Return-Path: owner-portmaster-radius@livingston.com
>Subject: RADIUS 2.0, Prefixing, and BSDi (fwd)
>To: portmaster-radius@livingston.com
>Date: Tue, 3 Dec 1996 20:05:23 -0800 (PST)
>From: MegaZone <megazone@livingston.com>
>Organization: WPI Discordian Society, Undocumented Cabal of the Accursed
Saint Shiranto Joe
>Sender: owner-portmaster-radius@livingston.com
>Reply-To: MegaZone <megazone@livingston.com>
>
>Once upon a time Andrew Silliker shaped the electrons to say...
>> ~> uname -a
>> BSD/OS gold.interlog.com 2.1 BSDI BSD/OS 2.1 Kernel #0: Sun Sep 15
04:02:26 EDT 1996
>> root@gold.interlog.com:/usr/src/sys/compile/INTERLOG i386
>> ~> ./sources/BSDOS_2.0/builddbm
>> ./sources/BSDOS_2.0/builddbm: Couldn't store datum for test
>> ~> cat users
>> test Auth-Type = System, Prefix = "P"
>> Service-Type = Framed-User,
>> Framed-Protcol = PPP,
>> Framed-Routing = None,
>> Framed-MTU = 1500,
>> Framed-IP-Address = 192.168.0.1
>> test Auth-Type = System, Prefix = "S"
>> Service-Type = Framed-User,
>> Framed-Protocol = SLIP,
>> Framed-Routing = None,
>> Framed-MTU = 1006,
>> Framed-IP-Address = 192.168.0.1
>> ~>
>>
>> Can one not prefix using a specific username, or does it
>> have to be done via defaults? If it must be done via
>> defaults, it would seem to be a significant drawback.
>
>AFAIK it works on users as well as DEFAULTS.
>
>I don't know what DBM isn't taking. I would try running it in non-DBM mode
>to see if the settings work. Narrow it down.
>
>-MZ
>--
>Livingston Enterprises - Chair, Department of Interstitial Affairs
>Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
>For support requests: support@livingston.com <http://www.livingston.com/>
>Snail mail: 4464 Willow Road, Pleasanton, CA 94588
>
>
>