Re: RADIUS 2.0, Prefixing, and BSDi
Dustin Machi (dmachi@tusculum.edu)
Wed, 04 Dec 1996 09:07:09 -0500
>Date: Wed, 04 Dec 1996 08:50:22 -0500
>To: Andrew Silliker <silliker@interlog.com>
>From: Dustin Machi <dmachi@tusculum.edu>
>Subject: Re: RADIUS 2.0, Prefixing, and BSDi
>
>At 10:50 PM 12/3/96 -0500, you wrote:
>> I sent this query to support earlier in the day, but haven't gotten
>> a response yet. Though that I'd try here.
>>
>> I'd like to use the prefixing capabilities of RADIUS 2.0, but am running
>> into a bit of a problem:
>>
>> ~> uname -a
>> BSD/OS gold.interlog.com 2.1 BSDI BSD/OS 2.1 Kernel #0: Sun Sep 15
04:02:26 EDT 1996
>> root@gold.interlog.com:/usr/src/sys/compile/INTERLOG i386
>> ~> ./sources/BSDOS_2.0/builddbm
>> ./sources/BSDOS_2.0/builddbm: Couldn't store datum for test
>> ~> cat users
>> test Auth-Type = System, Prefix = "P"
>> Service-Type = Framed-User,
>> Framed-Protcol = PPP,
>> Framed-Routing = None,
>> Framed-MTU = 1500,
>> Framed-IP-Address = 192.168.0.1
>> test Auth-Type = System, Prefix = "S"
>> Service-Type = Framed-User,
>> Framed-Protocol = SLIP,
>> Framed-Routing = None,
>> Framed-MTU = 1006,
>> Framed-IP-Address = 192.168.0.1
>> ~>
>>
>> Can one not prefix using a specific username, or does it
>> have to be done via defaults? If it must be done via
>> defaults, it would seem to be a significant drawback.
>>
>> If anyone has gotten this working, I'd appreciate hearing
>> from them.
>>
>> Thanks,
>> Andrew
>
>
>I believe that the user name needs to be changed from test to Ptest and
Stest. The example in section 4-5 of the Radius 2.0 PS document uses a
similar authentication line which reads
>
>Pbob Auth-Type = System, Prefix = "P"
>
>
>remember that both the prefix and user name are case sensitive.
>
>
>Dustin Machi
>Network Technician
>Tusculum College
>