> Hi all!
>
> We have recently added an Ascend Max to our group of PM2E30's. Before we
> can actually use it, though, we need to be able get the radius accounting
> working on the Ascend as it does on the Portmasters (since for some of our
> accounts we charge for over-hours). However, the radius logging that is
> taking place for the Ascend looks like this:
>
> Wed Jan 22 10:14:56 1997
> User-Name = "letsche"
> Password = "secret-stuff"
> Client-Id = 199.120.107.93
> Client-Port-Id = 20101
> Login-Host = 199.120.107.101
You have something messed up on your Ascend's configuration. The above is
an authorization packet, not an accounting packet. The Ascends can have
the ports configured for each service, so you might have the ports set
wrong. When you get it set right, you will get logs much like below.
Under:
Ethernet
Mod Config
Auth
Auth=RADIUS
Auth Host #1=ip of your RADIUS server here
Auth Port=1645
Auth Key=your RADIUS secret here
Accounting
Acct=RADIUS
Acct Host #1=ip of your RADIUS server here
Acct Port=1646
Acct Key=your RADIUS secret here
(Portmaster users may well ask, "What on earth is RADIUS doing under
Ethernet?")
> and no records show up for logging out, as they do with the PM, ie.:
>
> Wed Jan 22 02:31:15 1997
> Acct-Session-Id = "1C0007D5"
> User-Name = "maryt"
> Client-Id = 199.120.107.96
> Client-Port-Id = 24
> NAS-Port-Type = Async
> Acct-Status-Type = Stop
> Acct-Session-Time = 14875
> Acct-Authentic = RADIUS
> Acct-Input-Octets = 268078
> Acct-Output-Octets = 1251333
> Acct-Terminate-Cause = Lost-Carrier
> User-Service-Type = Framed-User
> Framed-Protocol = PPP
> Framed-Address = 199.120.107.4
> Acct-Delay-Time = 0
>
> Is there any way to make the Ascend dump this kind of information to
> Radius?
>
> Thanks for any insights.
>
> Terry Letsche
>
----------------------------------------------------------------------------
Steven P. Crain scrain@shore.net http://www.shore.net/~scrain
Shore.Net Unix Development and Administration
An ISP with Excellence in the Greater Boston Area.