> sclarke@widow.aracnet.net wrote:
> >
> > Hello,
> >
> > Having little routing knowledge, I have a quick question.
> >
> > A customer of ours has his own class C and would like to connect to us/the
> > Internet and have all his office machines on his class C. Using a
> > Livingston Portmaster 2E, can I accomplish this by having him dial into
> > one of the regular BRI ports on the ISDN module or do I need some sort of
> > a router dedicated to him?
> >
> > Thanks,
> >
> > Steve
> > AracNet
>
> You can do this on async as well as on a BRI. Remember that these
> connections use unnumbered links. What you would do is create an
> entry in the RADIUS users database, setting the Framed-Address
> to the IP address of the remote ethernet and the Framed-Netmask (sp?)
> to 255.255.255.0. If the remote end is a Livingston too, the standard
> config for this (in the docs) will work. On a Cisco, you would need to
> use the `ip unnumbered' command on the interface.
>
I shall give this a try. Thanks all who replied.
Steve
AracNet