I would like to know how to enable CHAP on portmaster pm2.
Currently it is running 3.5.
at show glo show that:
pm1-tokyo> show glo
System Name: pm1-xxxxx
Default Host: 0.0.0.0
Alternate Hosts:
IP Gateway: x.x.x.x
Gateway Metric: 1
Default Routing: Quiet (Off)
Name Service: DNS
Name Server: y.y.y.y
Domain: xyz.net
Telnet Access Port: 23
Loghost: x.x.x.x
Maximum PMconsole: 1
Assigned Address: x.x.x.x
RADIUS Server: x.x.x.x
Alternate Server: x.x.x.x
Accounting Server: x.x.x.x
Alt. Acct. Server: 0.0.0.0
PPP Authentication: PAP: on CHAP: on
Disabled Modules: OSPF
debug shows that:
-------------------------------------------------------------
Sending LCP_CONFIGURE_REQUEST to port S2 of 24 bytes containing:
01 01 00 18 02 06 00 00 00 00 05 06 33 0B 28 23 07 02 08
02 03 04 C0 23
Packet Info: Code: 01, ID: 01, 24 bytes.
Async-Control-Character-Map [0x02], length: (6 bytes),
[0x00000000]
Magic-Number [0x05], length: (6 bytes), [0x330B2823]
Protocol-Field-Compression [0x07], length: (2 bytes)
Address-and-Control-Field-Compression [0x08], length: (2 bytes)
Authentication-Protocol [0x03], length: (4 bytes), Password
Authentication Protocol [0xC023]
Received LCP_CONFIGURE_NAK on port S2 of 5 bytes containing:
03 01 00 09 03 05 C2 23 80
Packet Info: Code: 03, ID: 01, 9 bytes.
Authentication-Protocol [0x03], length: (5 bytes), Challenge
Handshake Authentication Protocol [0xC22380]
Sending LCP_CONFIGURE_REQUEST to port S2 of 20 bytes containing:
01 02 00 14 02 06 00 00 00 00 05 06 33 0B 28 23 07 02 08
02
Packet Info: Code: 01, ID: 02, 20 bytes.
Async-Control-Character-Map [0x02], length: (6 bytes),
[0x00000000]
Magic-Number [0x05], length: (6 bytes), [0x330B2823]
Protocol-Field-Compression [0x07], length: (2 bytes)
Address-and-Control-Field-Compression [0x08], length: (2 bytes)
Received LCP_CONFIGURE_ACK on port S2 of 16 bytes containing:
02 02 00 14 02 06 00 00 00 00 05 06 33 0B 28 23 07 02 08
02
Packet Info: Code: 02, ID: 02, 20 bytes.
Async-Control-Character-Map [0x02], length: (6 bytes),
[0x00000000]
Magic-Number [0x05], length: (6 bytes), [0x330B2823]
Protocol-Field-Compression [0x07], length: (2 bytes)
Address-and-Control-Field-Compression [0x08], length: (2 bytes)
Received LCP_CONFIGURE_REQUEST on port S2 of 19 bytes containing:
01 03 00 17 02 06 00 0A 00 00 05 06 11 10 68 85 07 02 08
02 0D 03 06
Packet Info: Code: 01, ID: 03, 23 bytes.
Async-Control-Character-Map [0x02], length: (6 bytes),
[0x000A0000]
Magic-Number [0x05], length: (6 bytes), [0x11106885]
Protocol-Field-Compression [0x07], length: (2 bytes)
Address-and-Control-Field-Compression [0x08], length: (2 bytes)
Callback [0x0D], length: (3 bytes), [0x06]
Sending LCP_CONFIGURE_REJECT to port S2 of 7 bytes containing:
04 03 00 07 0D 03 06
Packet Info: Code: 04, ID: 03, 7 bytes.
Callback [0x0D], length: (3 bytes), [0x06]
Received LCP_CONFIGURE_REQUEST on port S2 of 16 bytes containing:
01 04 00 14 02 06 00 0A 00 00 05 06 11 10 68 85 07 02 08
02
Packet Info: Code: 01, ID: 04, 20 bytes.
Async-Control-Character-Map [0x02], length: (6 bytes),
[0x000A0000]
Magic-Number [0x05], length: (6 bytes), [0x11106885]
Protocol-Field-Compression [0x07], length: (2 bytes)
Address-and-Control-Field-Compression [0x08], length: (2 bytes)
Sending LCP_CONFIGURE_ACK to port S2 of 20 bytes containing:
02 04 00 14 02 06 00 0A 00 00 05 06 11 10 68 85 07 02 08
02
Packet Info: Code: 02, ID: 04, 20 bytes.
Async-Control-Character-Map [0x02], length: (6 bytes),
[0x000A0000]
Magic-Number [0x05], length: (6 bytes), [0x11106885]
Protocol-Field-Compression [0x07], length: (2 bytes)
Address-and-Control-Field-Compression [0x08], length: (2 bytes)
**** S2: LCP Open
Couldn't CHAP on port S2 - Not allowed
Sending LCP_TERMINATE_REQUEST to port S2 of 4 bytes containing
05 03 00 04
Packet Info: Code: 05, ID: 03, 4 bytes.
Connection Failed
--------------------------------------------------------------------
Any suggestions?
tatsuya
On Mon, 25 Aug 1997, MegaZone wrote:
> Once upon a time Tatsuya Kawasaki shaped the electrons to say...
> >I am wondering if the CMOS can handle more than 1 name server?
>
> ComOS (not CMOS, that's something else) can have 2 nameservers.
>
> 'set nameserver 2 x.x.x.x'
>
> >I wonder if my portmaster could not accept CHAP on s2 though when show glo
> >shows that chap is on?
>
> a 'cannot CHAP' message does not necessarily mean we refused it. Having
> CHAP on does not cover all options. Without knowing the details I can't
> comment farther.
>
> -MZ
> --
> Livingston Enterprises - Chair, Department of Interstitial Affairs
> Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
> For support requests: support@livingston.com <http://www.livingston.com/>
> Snail mail: 4464 Willow Road, Pleasanton, CA 94588
>
>