(RADIUS) user file help

Billy Hamblin (billyh@midsouth.net)
Tue, 07 Apr 1998 15:04:42 -0500

I know this is a newbie question most likely. I'm in the process of making
us a new radius user file for when we go live Thursday with our PM3's. I
want to set this up differently than what we had in the past so that
instead of making changes to every single individual user entry I only have
to change a few master settings.

This is what our old user file contained:

mylogon Password = "mypassword"
User-Service = Framed-User,
Framed-Protocol = PPP,
Session-Timeout = 25200,
Idle-Timeout = 1200,
Framed-Address = 255.255.255.254,
Framed-Netmask = 255.255.255.255,
Framed-Compression = Van-Jacobsen-TCP-IP,
Framed-MTU = 1500,
Port-Limit = 1

DEFAULT Password = "UNIX"
User-Service = Login-User,
Login-Service = Rlogin

These are what we have for our PM'2s (I know we didn't need that port-limit
:\ )

What I want to do is have 4 different sets of settings.

A. Normal dial-up web access with the above limitations(session,idle) and
limit bandwidth to 56k or 64k even if that is possible. (I don't want ISDN
users signing up for regular accounts and using ISDN.
B. A mail only setup so a user can get on and check mail but do nothing
else. No web access. Of course this would have a much shorter session limit.
C. ISDN dial-up access at 64k or one channel
D. ISDN dial-up access at 128k or two channels

Is this possible to do? I'm thinking I can just make the 4 different setups
and label them somehow according to what they are used for (a,b,c,d ect)
and then everytime we add a user we would simply specify them as an a,b,c,d
ect and it would refer them to those settings. Would this be done with
filters? Thats something I haven't tried using yet. If I can get some
examples of how these would be done it would be most helpful. We are using
a NT 4.0 server with NT Radius 2.0.1 B12. I'm not quite sure on the version
of our dictionary file, I think its 1.4. I know its newer than the version
on our PM2's. I know that some of the items will be different from the old
dictionary file to the new one and I think I am prepared to change those
with out any problems. I just need to know how the 4 groups of settings
would be structured along with the end default entry.

Thanks for any examples or suggestions you can send my way.

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Billy Hamblin - Residential OM |
|Midsouth ConNEcTions - 931.648.9024 |
|1770-B Madison St. - billyh@midsouth.net |
|Clarksville Tn 37043 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-radius' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>