Michael Nerone | Internet Direct, Inc. | http://www.txdirect.net
nerone@txdirect.net | 722-B Isom Rd. | Please direct all queries
| San Antonio, TX 78216 | to sales@txdirect.net.
| Voice: (210)308-9800 | Direct all tech questions
| Fax: (210)308-9240 | to support@txdirect.net
Any opinions expressed herein are my own and do
not necessarily reflect those of my employer.
On Mon, 25 Sep 1995, Allen J. Newton wrote:
> Marvin Y. Wu wrote:
> > Subject: S10-19 not working on PM2ER-20
> >
> > One of my customers has a PM2ER-20. All the ports
> > have identical settings and all the modems are the
> > same (PPI PC288). All the modems on ports S0-S9
> > work fine, but none of them works on S10-S19.
> > When I do attach S10, it says it connects,
> > but whatever I type afterwards has no effect
> > (and is not echoed). The modems have auto answer
> > on. When I dial to any of them, it'll pick up
> > and negotiate the connection, and then hang.
> >
> > I just upgraded to the newly released ComOS,
> > which doesn't make any difference in this regard.
> >
> > I'm wondering if there's any solution to this
> > or this PM2ER is simply defective?
>
> Sounds defective to me.
>
> I bought a PM-2E, and I tested all the ports with a serial terminal
> directly to each port on the PM one at a time. They all allowed logins,
> and had no problems except for S27. _Exact_ same problem with that one
> port as you're describing for the 10 on your board 2...
>
> Livingston RMA'd board 3 for me (quickly, I might add -- thanks
> Livingston), and we've had no problems since.
>
> --
> -------------------------------------------------------------------------------
> Allen J. Newton BASIS International Ltd, (505)-345-5232
> 5901 Jefferson NE, Albuquerque, New Mexico 87109
> anewton@basis.com Network Administrator <*>
>