> Hi,
>
> I run ComOS 3.3.2c1 on a PM2E with a 5BRI card. My TELCO (France
> Telecom) swears on a stack of phonebooks that I'am on EuroNumeris and
> thus my switch type should be "net3" (according to Livingston). The
> problem is that I have the NO SERVICE indication when I do "sh all". I
> have done the "set isdn-sw net3", "save all", "reset all" and re-booted
> with no effect.
>
> Does anyone know of instructions how to setup the 5BRI in general and
> in
> Europe (switch net3) in particular?
>
> Peter
>
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> leNet - Loire Valley and Chateaux Country Internet
> 29 rue Edouard Vaillant - 37000 Tours - France
> tel. +33 02 47 66 17 17 - fax +33 02 47 05 56 26
> http://www.lenet.fr
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>
>
-- ***** The expressed opinions are totally mine! ***** Frank M. Heinzius MMS Communication GmbH frimp@mms.de Eiffestrasse 598 http://www.mms.de 20537 Hamburg, Germany Phone: +49 40 211105-0 Fax: +49 40 210 32 210 ***** U.S.Robotics and Livingston Distributor *****