5BRI Euro style

Peter Dellerman (peter@lenet.fr)
Wed, 04 Sep 1996 16:57:47 +0200

Allan Jacobsen wrote:
ems with EUROisdn too. What I found out by dialing into
> the BRI5 with a ZyXel modem is:
> The BRI doesn't work with the x75 protocol, that it default with most
> european isdn modems, I have only been able to get it to work with V120
> and HDLC-syncppp mode.
>
> I have also tried to get dial on demand working, but get the error:
> "No dial script available for a"
> "dialsend: Invalid length dial string 0"
> Off cause I HAVE a dial script, but with lines 1 and 2. If I try to enter a
> string nr. 0 I get an error message.
> Anyone seen anything like this.?
>
> TIA
>
> --
> Allan Jacobsen <allan@internet.dk>
> System administrator, Internet Danmark

I'm glad to see that you have been able to make it work, even if it's
limited. I'm not able to have it do anything.

Can you tel me the procedure you have used to set it up to answer a
call. I'm calling in with a Pipline 50 and it does have the v120 I
believe.

Peter

-- 
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
leNet - Loire Valley and Chateaux Country Internet
29 rue Edouard Vaillant - 37000 Tours - France
tel. +33 02 47 66 17 17  -  fax +33 02 47 05 56 26
http://www.lenet.fr
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<