> We're still toying with the thought of ISDN and we're not yet sure if
> we will be using it en masse or not. Towards that end we've gotten a
> single BRI and would like to get a BitSurfer Pro to test it with, my
> questions are:
>
> 1) Can an External ISDN device work with a normal PM2E?
Yes.
> 2) In this configuration can you only use one B or 2B?
2B.
> 3) If 2B How does bonding work?
That is an issue on the Motorola. You want to use multilink PPP, not
bonding. Bonding is for a sync connection(external clock required.)
> 4) Is there anything special you need to do to the portmaster for it
> to work?
No.
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
Patrick Greenwell (510) 943-5769 voice
Systems Administrator (510) 210-2000 modem
Value Net, Inc. (510) 943-1708 fax
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/