Re: Reboots after pm2_3.3.2 Upgrade (fwd)

Mark Gehres (gehres@datasync.com)
Mon, 9 Sep 1996 16:17:15 -0500

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: MegaZone: "Re: Reboots after pm2_3.3.2 Upgrade (fwd)"
Previous message: Runar Jensen: "Re: Protocol error"
Maybe in reply to: MegaZone: "Reboots after pm2_3.3.2 Upgrade (fwd)"
Next in thread: Igor V. Semenyuk: "Re: Reboots after pm2_3.3.2 Upgrade (fwd)"

At 01:23 PM 9/9/96 -0700, you wrote:
>Once upon a time rick osteen shaped the electrons to say...
>>re-upgraded the silly thing(that's when it was rebooting every 2 minutes).
>>Now it reboots only when I type in "ver" or "version" .
>
>BTW - was it 3.3.2c1 or just 3.3.2? 3.3.2c1 is better.
>
I have 3.3.2 on 3 of 10 PM2Es. Two run fine, one every so often starts
rebooting everytime a PPP auth request hits it(I have to repower to get it
stable) and another that I put it on always rebooted on PAP and I had to
reload 3.3.1. Is there a fix for 3.3.2 or should I replace it with 3.3.1 on
all my boxes?

--
Mark Gehres           Datasync Internet, serving the MS and AL gulf coast.
President/CEO         sales@datasync.com, support@datasync.com
gehres@datasync.com   http://www.datasync.com, info@datasync.com

Next message: MegaZone: "Re: Reboots after pm2_3.3.2 Upgrade (fwd)"
Previous message: Runar Jensen: "Re: Protocol error"
Maybe in reply to: MegaZone: "Reboots after pm2_3.3.2 Upgrade (fwd)"
Next in thread: Igor V. Semenyuk: "Re: Reboots after pm2_3.3.2 Upgrade (fwd)"