Re: PM3/Radius Question

Dale E. Reed Jr. (daler@iea.com)
Mon, 16 Sep 1996 17:14:28 -0700

Vince Callaway wrote:
>
> The PM3 looks as if it is the solution I have been looking for, but I
> have one concern I have not seen addressed.
>
> We currently charge a different rate for modem dial-up and ISDN dial-up. We
> keep them isolated by running seperate radius servers for each. How will
> I be able to keep modem users from using ISDN if everything is in one box?

By the NAS-Port-Type. We currently support PM2e30 with the BRI card
doing
this. You just add a check attribute for the user. From the
dictionary:

VALUE NAS-Port-Type Async 0
VALUE NAS-Port-Type Sync 1
VALUE NAS-Port-Type ISDN 2
VALUE NAS-Port-Type ISDN-V120 3
VALUE NAS-Port-Type ISDN-V110 4

So you make a user entry like this:

user Password = "pass", NAS-Port-Type = Async

user Password = "pass", NAS-Port-Type = ISDN

-- 
Dale E. Reed Jr.  (daler@iea.com)
_____________________________________________________________________
 Internet Engineering Associates   |  RadiusNT, Emerald, and NT FAQs
  Internet Solutions for Today     |     http://www.iea.com/~daler