abort errors, again...

Jacob Suter (jsuter@intrastar.net)
Thu, 19 Sep 1996 14:16:49 -0500

Command> sh w1
----------------------- Current Status - Port W1
---------------------------
Status: ESTABLISHED
Input: 290350674 Abort Errors: 15
Output: 51002508 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0
Modem Status: DCD+ CTS+

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext 56K Ext Clock
Modem Control: off off
Modem Config: Not Configured card-288
Remote Host: CISCO.INTRASTAR.NET CISCO.INTRASTAR.NET
Local Address: WAN1.INTRASTAR.NET WAN1.INTRASTAR.NET
Netmask: 255.255.255.0 255.255.255.0
Interface: ptpW1 (PPP,Listen) (PPP,Quiet)
Mtu: 1500 1500
Dial Group: 0

This in a period of...

Command> ver
Livingston Enterprises PortMaster Version 3.3.2
System uptime is 2 days 17 hours 33 minutes
Command>

This is about five times as fast as it usually occurs. GTE claims
everything is "ok" (lie lie lie, I tell you!), so what do I tell GTE to
go fix?

Thanks
JS