IRX-114

Gary Carr (sysop@nconline.com)
Thu, 26 Sep 1996 14:07:15 -0400

Here are the current routing tables for both routers and some other
information. I have a single class C subnetted into 2 networks. Im using
255.255.255.128 for the netmask on everything.

Livingston
irx1> sho route
Destination Gateway Flag Met Interface
--------------------- -------------------- ---- --- ---------
0.0.0.0 204.70.32.149 NS 1 ptp1
207.1.154.129 207.1.154.129 HL 1 ptp2 --> Should
this even be here?
207.1.154.36 207.1.154.7 HD 2 ether0
207.1.154.38 207.1.154.7 HD 2 ether0
207.1.154.39 207.1.154.7 HD 2 ether0
207.1.154.42 207.1.154.7 HD 2 ether0
204.70.32.149 204.70.32.149 HL 1 ptp1 --> Should
this even be here?
207.1.154.29 207.1.154.7 HD 2 ether0
207.1.154.0 207.1.154.1 NL 1 ether0
207.1.154.128 207.1.154.126 NS 1 ether0

irx1> sho s1
----------------------- Current Status - Port S1
---------------------------
Status: ESTABLISHED
Input: 22447011 Abort Errors: 0
Output: 5261949 CRC Errors: 0
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext Clock Ext Clock
Modem Control: on on
Remote Host: border1-serial4-1-7.San
border1-serial4-1-7.SanFrancisco.mci.net
Local Address: carolina-online.SanFran
carolina-online.SanFrancisco.mci.net
Netmask: 255.255.255.128 255.255.255.128
Interface: ptp1 (PPP,Routing) (PPP,Routing,Compress)
Mtu: 1500
0

irx1> sho s2
----------------------- Current Status - Port S2
---------------------------
Status: ESTABLISHED
Input: 398341 Abort Errors: 63
Output: 259488 CRC Errors: 8
Pending: 0 Overrun Errors: 0
TX Errors: 0 Frame Errors: 0

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Hardwired)
Line Speed: Ext Clock Ext Clock
Modem Control: on on
Remote Host: laurinburg.nconline.com laurinburg.nconline.com
Local Address: 207.1.154.126 207.1.154.126
Netmask: 255.255.255.128 255.255.255.128
Interface: ptp2 (PPP,Routing) (PPP,Routing)
Mtu: 1500
1500

irx1> ifconfig
ether0: flags=16<IP_UP,IPX_DOWN,BROADCAST>
inet 207.1.154.1 netmask ffffff80 broadcast 207.1.154.127 mtu
1500
ptp2: flags=35<IP_UP,IPX_DOWN,POINT_TO_POINT>
inet 207.1.154.126 dest 207.1.154.129 netmask ffffff80 mtu 1500
ptp1: flags=35<IP_UP,IPX_DOWN,POINT_TO_POINT>
inet 204.70.32.150 dest 204.70.32.149 netmask ffffff80 mtu
1500

Telebit
laurinburg:Top>Configure>IP>Route> l
Dest Len Interface Gateway Metric P Timer Use
127.0.0.2 32 null 1 P 0 0
207.1.154.128 25 en0 1 0 0
127.0.0.0 8 loopback 1 P 0 0
default 0 lbton 207.1.154.126 1 0
1431

laurinburg:Top>Configure>Interface> l
Name IP address MTU MRU type Status(line) pkts in
pkts out
loopback 127.0.0.1 65535 - Up ( )
0 0
null 207.1.154.254 65535 - Up ( )
0 0
error 127.0.0.3 65535 - Up ( )
0 0
en0 207.1.154.129 1500 1500 Ether Up ( )
500 37
lt0 600 600 LTalk Up ( )
0 0
lbton 207.1.154.129 1500 1500 PPP Up (line00 )
1828 2213

I can ping the telebit from the Livingston but can not get past it. It
worked fine before I installed the Livingston IRX-114. Can someone
explain what I am missing?

Thanks,

Gary Carr

-- 
Carolina Online - Lumberton's only complete online service!
Virtual Hosting for Internet Service Providers - Give your users TRUE
multimedia applications and "real-time" multiplayer games. Get more info
at http://www.nconline.com/virtual.htm