> >The IP of my test portmaster is 206.40.219.8. I believe I've tried:
> >
> >add route 207.87.196.0 206.40.219.8 1
>
> You CANNOT do this - period. NEVER use the IP of the PM as a gateway.
>
> The PM can see one and only one network on an interface, that is all.
> You will not be able to make the PM see both IPs of that host directly,
> it can only see IPs on the network that ether0 is on. To see the other
> IP you MUST have a gateway someone on the network that sees both of them,
> and set the route in the PM to use that gateway.
So if I wanted to use two class C networks 206.11.208, and 206.11.210, I
can't do it. I know that large ISPs offer static IPs over multiple PMs,
how do they do it?
Brian