> I'm trying to set the netmask on ether0 on a PM2E-30.
>
> Every time I type 'set ether0 netmask 255.255.255.252', the box locks up
> and needs to be powercycled. After the power cycle, it still has the
> original netmask.
What do you mean locks up? Where you trying to set it via a telnet session?
Try setting the ether0 netmask from a terminal attached to one of the serial
ports. This could be directly connected or via a dialup modem.
Ah, why are you trying to set the netmask to the very tight .252??
JGT
-- John G. Thompson Livingston Enterprises Inc. Phone: (800) 458-9966 JOAT(MON) 6920-220 Koll Centre Pkwy. Fax: (510) 426-8951 support@livingston.com Pleasanton, CA 94566 http://www.livingston.com