Re: Stuck W1 port

Helio Coelho Jr. (helio@compuland.com.br)
Tue, 08 Oct 1996 20:25:46 -0300

At 00:04 09/10/96 +0200, you wrote:
>
>This looks like a telco problem but after replacement of the V.35 modem
>and putting it on different wires it still continued:
>
>Tried Comos 3.1.4 and 3.3.2c2, same results. W1 functions for about a day
>reading occasional frame and abort errors then all of a sudden it stays
>on ESTABLISHED, idle time remains 0, but not a single bit can go thru;
>the other side is a cisco saying "line protocol down". A reset W1 solves
>it each time. Needless to say this is most annoying :-(

I'm having just the same, in a PPP conection with a Cisco Router. The Cisco is
running release beyond 10. After a reset the traffic just starts flowing again.
I'm stuck...
I'm running 3.3.2c1 in a Pm2er30.

Regards,
Helio.

>
>Previous experience with "stuck" lines always required a physical reset of
>the V.35 modem and where always a telco problem but since this one kicks
>back in after a "soft" reset ... Could this be a hardware problem with
>the W1 port ?
>
>--Steven.
>
>